What is a VESA size? Measuring VESA sizes and choosing a TV mount

The VESA size is shown as width × height in millimeters. You measure from the center of one screw hole to the center of the other. So do not measure the outer edges of the holes or the full width of your television.

1. Find the mounting holes. Look at the back of your TV for four screw holes. They may sometimes be covered with caps or recessed.
2. Measure horizontally. Measure from the center of the left mounting hole to the center of the right mounting hole.
3. Measure vertically. Measure from the center of the top hole to the center of the bottom hole.
4. Record the result in millimeters. For example, 400 mm wide and 200 mm high: your TV then has VESA 400 × 200.

Practical example: you measure 40 centimeters between the left and right holes and 30 centimeters between the top and bottom holes. That is 400 × 300 mm, or VESA 400 × 300. The horizontal measurement always comes first.

Can't you safely access the back? Look up the VESA specification in the manual or on the manufacturer's website using the exact model number.

There are various square and rectangular VESA patterns. The measurements below are examples; the screen size or brand does not automatically determine the VESA size.

These are not all existing combinations. Some TVs and professional displays use non-standard sizes or special mounting solutions. Therefore, always check your model's exact specifications.

The product page for a TV mount states which VESA sizes it supports. If your exact size is listed in the specifications and your TV also meets the other requirements, the mount may be suitable. Some mounts support multiple patterns through adjustable mounting arms. Note that a specified maximum VESA size does not automatically mean that every smaller or different intermediate size will fit.

Therefore, check these four points: exact VESA compatibility, TV weight without the stand, permitted screen size and clearance, and the mounting surface and installation method. For example, a TV with VESA 400 × 400 may still be unsuitable for a mount with insufficient load capacity.

View our TV wall mounts, TV ceiling mounts, or mounts for large TVs and check compatibility for each product.

The screws used to attach the TV to the bracket must match the TV's thread and the permitted insertion depth. Many models use metric screws such as M4, M6 or M8, but you cannot reliably determine the correct size from the VESA size alone. Consult the TV manual.

A screw that is too short may not provide sufficient grip; a screw that is too long can damage components inside the TV. Some TVs need spacers because the back is curved, the holes are recessed, or clearance is needed for connections. Only use the combination specified as suitable in the mounting instructions, and never force a screw that does not turn smoothly into the thread.

Many brackets come with a set of mounting screws, but they cannot cover every possible TV combination. If necessary, view our mounting accessories and check the manufacturer's specifications.

Where can I find my TV's VESA size?

In the manual or technical specifications of the exact TV model. You can also measure the size yourself between the four mounting holes on the back.

What does VESA 400 × 400 mean?

The mounting holes are 400 mm apart horizontally and 400 mm apart vertically, measured center to center.

Is VESA 200 × 100 the same as 100 × 200?

No. The first measurement is horizontal, the second vertical. Check whether the mount supports the exact orientation.

Does every TV have four VESA holes?

Many televisions have four mounting points, but there are also nonstandard and brand-specific solutions. Therefore, always check the manufacturer's information.

Does a VESA 400 × 400 TV fit a mount with a maximum VESA of 600 × 400?

Possibly, but not automatically. The mount must explicitly support 400 × 400 and have sufficient load capacity.

What VESA size does a 55-, 65-, or 75-inch TV have?

It varies by brand and model. Screen size alone is insufficient to determine the VESA size.

Can I use a VESA adapter for a larger television?

Only if the adapter, mount, and TV are compatible according to their specifications. An adapter does not increase the load capacity.

How do I know which screws my TV needs?

Refer to the manufacturer's installation instructions. Diameter, length, and any spacers vary by model.

Can I mount a television without standard VESA holes?

Sometimes a model-specific solution exists. Do not use a random adapter or homemade mounting solution without suitable manufacturer information.

Can I measure the VESA size while my TV is still on its stand?

This is possible when the four mounting holes are safely accessible. If necessary, move a large screen with two people and avoid putting pressure on the panel.