Skip to content
  • +31881120500
  • info@tvbeugels.nl
  • Order on working days before 17:00 for same-day dispatch
  • Help & Troubleshooting Electric Ceiling Mount

    Wolff Mount Electric Ceiling Mount TVB-106 & TVB-107

    Is your electric ceiling mount getting stuck, is the remote control not responding, or are you unable to

    Electric ceiling mount 32-55 inch TVB-106 APP Side

    can't pair with the Tuya App? This page explains all the reset and recovery options for the Wolff Mount TVB-106 and TVB-107.


    Ceiling mount no longer moves down

    If the mount no longer responds or only moves up, perform a full reset first.

    Reset the ceiling mount

    1. Unplug the ceiling mount from the power outlet.
    2. Wait at least 10 seconds.
    3. Plug it back into the power outlet.
    4. Press and hold the OK button on the remote control for about 5 seconds.
    5. The ceiling mount will now automatically start a reset procedure.
    6. After the reset, the mount returns to its starting position.

    This recalibrates the internal position settings.


    The ceiling mount does not respond at all

    Electric ceiling mount for TVs up to 75 inches tvb-107-side

    First check:

    • Is the plug properly connected to the power outlet?
    • Is the power indicator, if present, lit?
    • Are the batteries in the remote control still working?
    • Is anything physically touching the mount or TV?

    When all of this is in order:

    1. Perform a full reset.
    2. Then try moving it up and down again.

    Remote control not working

    First check:

    • Replace the batteries.
    • Stand within about 3 metres of the ceiling mount.
    • No metal obstacles between the remote control and receiver.

    If the remote control still doesn't work, you can pair it again.


    Pair the remote control again

    The TVB-106 and TVB-107 support reprogramming the remote control.

    Pair a new remote control

    1. Switch on the power to the ceiling mount.
      The programming button on the receiver of the electric ceiling mount for pairing the remote control.
    2. Press the programming button on the receiver.
    3. Within 10 seconds, press the SET button on the remote control.
    4. The ceiling mount beeps several times.
    5. The remote control is paired.

    The mount can store multiple remote controls.


    Clear all remote controls

    If you want to remove all paired remote controls:

    1. Press and hold the programming button on the receiver for about 5 seconds.
    2. Release after the double beep sounds.
    3. All paired remote controls have now been removed.
    4. Then pair the desired remote control again.

    Resetting positions

    The ceiling mount has memory positions.

    Save a memory position

    Move the TV to the desired position.

    Then press and hold:

    MEM1, MEM2 or MEM3

    for about 5 seconds until you hear a beep.

    The position is now saved.


    Recall a memory position

    Briefly press:

    • MEM1
    • MEM2
    • MEM3

    The ceiling mount moves automatically to the saved position.


    Ceiling mount does not move all the way up or down

    When the set end position is no longer correct:

    Perform a full reset.

    This resets the position to the factory settings.


    TVB-106: Resetting the tilt angle (sloped ceiling)

    Only available on the TVB-106.

    When the TV is no longer level on a sloped ceiling:

    1. Keep the TV still.
    2. Press and hold the designated tilt button.
    3. Adjust the angle again.
    4. If necessary, save a memory position again.

    If you encounter problems, you can first perform a full reset.


    Reconnect WiFi or the Tuya App

    When the ceiling mount is no longer visible in the Tuya Smart App:

    Step 1

    Open the Tuya Smart App.

    Step 2

    Select:

    + Add device

    Step 3

    Connect your phone to a 2.4 GHz WiFi network.

    5 GHz is not supported.

    Step 4

    Select:

    Motorized TV Solution

    Step 5

    Enter the WiFi password.

    Step 6

    After about 10 to 60 seconds, the ceiling mount is added automatically.

    A beep confirms that the connection was successful.


    Reactivating WiFi (TVB-106)

    Only available on the TVB-106.

    When WiFi is turned off:

    1. Press and hold the WiFi button for about 3 seconds.
    2. Release when the beep sounds.
    3. The WiFi module will be reactivated.

    If necessary, you can then reconnect the Tuya App.


    Delete and reconnect the Tuya App

    If the app keeps crashing:

    1. Open the Tuya App.
    2. Press and hold the device for a few seconds.
    3. Choose Remove Device.
    4. Add the ceiling mount again.

    Create a new home in Tuya

    If devices are not visible:

    1. Open Me.
    2. Choose Home Management.
    3. Choose Create Home.
    4. Name the home.
    5. Choose the desired room.
    6. Then add the ceiling mount again.

    Connect the app to multiple users

    You can give other household members access.

    Go to:

    Home Management → Add Member

    The new user will receive an invitation and gain access to the ceiling mount.


    Common issues

    The ceiling mount beeps continuously

    First perform a full reset.

    If the beeping continues, contact the supplier.


    The remote control works intermittently

    This is usually caused by:

    • Dead batteries
    • Distance is too great
    • Obstruction between the receiver and remote control

    The TV stops halfway

    Check:

    • No trapped cables.
    • No obstructions.
    • TV weight does not exceed the limit.
    • Then perform a reset.

    The TV moves unevenly

    Check:

    • Installation
    • VESA mount
    • TV weight
    • Reset if necessary.

    The ceiling mount is making a lot of noise

    Check:

    • Loose bolts
    • Cables interfering with the mechanism
    • Obstructions

    If the noise continues, stop using the ceiling mount and contact the supplier.


    Still having problems?

    If the steps above do not solve the problem:

    • Perform a full reset.
    • Reconnect the remote control.
    • Reconnect the Tuya App.
    • Check the power supply, wiring and installation.
    • Contact the supplier or installer for further assistance.

    These steps are based on the official manuals for the Wolff Mount TVB-106, TVB-107 and the Tuya Smart App.

    Arjan from TVMountXL.com
    About the author

    Arjan from TVMountXL.com

    Founder & Product Specialist

    Arjan shares practical product knowledge and installation tips to help you choose the right TV mount and mounting solution.