Skip to content
  • +31881120500
  • info@tvbeugels.nl
  • Order on working days before 17:00 for same-day dispatch
  • How do you mount a TV bracket on a wall?

    How do you mount a TV mount on a brick wall? What do you need?

    1. What you need:

    (Level, pencil, drill, anchors or concrete plugs, appropriate drill bit, screwdriver, safety glasses, dust mask, hammer and vacuum cleaner)
    (We recommend wearing protective equipment.)

    Tools for wall mounting, including a drill, level, hammer and protective equipment.

    2. Choose the right spot on the wall

    (We generally recommend positioning the center of the TV at a height of about 85 cm. However, this also depends on the height of your sofa and your specific situation.)

    A brick wall as an example of a surface for mounting a TV mount.

    3. Attach the wall plate to the wall


    1. Once you have determined the best location, hold the mount against the wall and use a level to make sure it is level.
    2. Mark the hole locations with a pencil. If your wall has mortar joints, do not drill into them. When installing on a brick wall, find the flattest surface for drilling the holes.
    3. Choose a drill bit that matches the diameter of the plugs/anchor bolts and drill the spots you marked earlier. Always drill 1/2 cm deeper than the plug length.
    4. Clean the hole with a vacuum cleaner to remove debris.
    5. If you choose a concrete anchor, follow this procedure: Insert the sleeve anchor into the hole and gently tap it in with a hammer until it is flush with the wall surface. Be careful not to damage the brick around the sleeves while tapping them in.
    6. Hold the TV mount against the wall, insert the bolt and tighten it securely with a wrench. Do not overtighten the bolt.

    Secure the wall plate with bolts and washers; the slotted holes allow for adjustment.

    4. Attach the TV brackets to the TV

    Find the holes on the back of the TV and align each bracket with them, then secure firmly with screws. Since TVs have mounting holes of different sizes, first choose the right screws for the screw holes on the back of your TV. Refer to the manual for this procedure.

    Attach the vertical mounting rails to the VESA points on the back of the TV with screws.

    5. Hang the TV on the wall

    TV mounts usually have hooks, making it easy to attach them to the wall bracket. Carefully lift the TV and hang it on the wall bracket.

    - Check that all the screws are tight so the TV is securely mounted.
    - Check that the mounted TV is level and in the right position. If not, you can loosen a few screws and, with another person’s help, carefully move the TV or mount into a horizontal position.

    Side view of a TV with its mounting rails hanging on the wall plate.

    Arjan from TVMountXL.com
    About the author

    Arjan from TVMountXL.com

    Founder & Product Specialist

    Arjan shares practical product knowledge and installation tips to help you choose the right TV mount and mounting solution.